When something in your home stops working the way it should, the answer you need is a clear one: what is wrong, what it takes to fix it, and what it will cost. We handle electrical repairs and installations throughout University and the surrounding area, taking calls every day from 8:30 AM to 10:00 PM. Whether you are dealing with a dead outlet, a panel that needs replacing, or a circuit that has to be added before a new appliance goes in, we scope the job on the call and give you a price before anything is scheduled.
University is a city with a mix of residential properties, rental units, and commercial spaces, and the electrical calls we get here reflect that. Homeowners dealing with aging wiring, property managers coordinating repairs between tenants, and businesses that need work done without shutting down for the day all reach us the same way: by phone.
Call (813) 519-5955 and we will talk through what you have, confirm the scope, and tell you what the visit covers before we book anything.
Pricing and Scope: What Shapes the Quote You Get
Every electrical quote starts with the same thing: an honest look at what the job actually involves. We give you a rate on the call based on what you describe, and that rate reflects the scope as we understand it before we arrive. Some jobs are straightforward. Others open up once we get into the wall or look at the panel, and when that happens, we explain what changed and give you a revised figure before we proceed.
A few things consistently move a quote in one direction or the other. What the fault turns out to be matters, because a loose connection at an outlet and a wiring fault deeper in the circuit are different jobs even if the symptom looks the same. What has to be opened up to reach the problem matters too. And whether the existing panel can carry a new circuit or a higher load is often the deciding factor on installation work. Load calculations are part of how we determine whether a panel upgrade needs to happen before anything else is added.
Ask what the price covers when you call. You will get a straight answer, and nothing is scheduled until you have it.
Let's Talk About What the Light Actually Does
Every home's wiring tells a different story, and lighting is where that story is most visible. Inside, the difference between a room that feels dim and one that works well often comes down to fixture placement and the type of light source rather than the number of fixtures. Recessed lighting distributes light more evenly than a single ceiling fixture, and LED retrofits cut energy draw without changing how a room looks.
Recessed lighting is one of the most common installation requests we get, and it pairs naturally with other work. If we are already in the ceiling running a circuit, adding recessed cans to the same visit saves time and keeps the disruption to one appointment. Dimmer switches, under-cabinet lighting, and pendant fixtures over kitchen islands are all jobs that make more sense done together than separately.
Outside, the priorities shift toward security, visibility, and durability. Motion-sensor lighting at entry points and driveways, weatherproof fixtures over garage doors and covered areas, and landscape lighting along walkways are all jobs we handle. In this region, outdoor fixtures take a beating from heat and humidity year-round, so the materials and wiring methods used matter as much as the placement. We'll handle the wiring so you don't have to.
Apartment and condo electrical work follows slightly different rules than single-family home work, and knowing where the lines are saves time. The panel in a unit is typically inside the apartment itself, but the building's main service and common-area wiring belong to the property. We handle everything inside the unit: outlets, switches, fixtures, circuit additions, and panel work that is within the unit's scope.
Where part of the service is shared with other units or managed by the building, the right call is usually to confirm with the property manager or building owner before scheduling work that touches those systems. We can scope the job on the phone and tell you which side of that line the work falls on. For landlords managing multiple units, we coordinate repairs around tenant schedules and can often handle more than one unit on the same visit if the work lines up.
Flexibility on the Calendar
We know schedules shift, so we keep booking flexible. For planned work, we confirm the scope and the price on the call, then find a time that fits. For problems that will not keep, we take short-notice calls and work to fit urgent jobs in as quickly as the schedule allows. Call and ask what is available.
Businesses and rental properties get the same flexibility. If a tenant needs to stay in the unit or a shop has to stay open, we work around it. The scope of the visit is confirmed before we arrive so there are no delays once we are on site. We make the fix and leave it tidy. Homeowners in University often read our services page before getting in touch.
Older properties in this area were built with materials and methods that made sense at the time and create specific issues now. Knob-and-tube wiring turns up in houses of a certain age: ungrounded, uninsulated, and not rated for the loads a modern home puts on it. It is not automatically a crisis, but it is worth understanding what you have and what it means for the circuits connected to it.
Aluminum branch-circuit wiring is a separate issue that also shows up in the area's housing stock. The risk with aluminum wiring sits at the connection points, where aluminum and copper meet and where the material expands and contracts with heat. Properly addressed, aluminum wiring can remain in place. Left unaddressed, those connections are where faults develop. We assess what is there, explain what it means, and give you a clear picture of what the options are before any work is scheduled.
Work in this area gets done to the code inspectors here actually enforce, and that standard applies whether the job is a single outlet or a full rewire. Code-compliant wiring on every job is not a slogan. It is what keeps the work from coming back as a problem later.
Recessed lighting requires a circuit that can carry the load of the fixtures added to it, and in older homes that sometimes means checking whether the existing circuit has room. LED fixtures draw far less than their predecessors, which helps, but placement and switching still have to be planned before the work starts. We handle the circuit work and the fixture installation together.
A service upgrade from 100-amp to 200-amp service is the right move when the panel is running out of capacity. Adding an EV charger, a standby generator hookup, or a large appliance to a panel that is already near its limit is how circuits start failing. We do a load calculation first to confirm what the existing service can carry and what the upgrade would need to cover.
An unlabeled panel is a problem that shows up every time something goes wrong and nobody knows which breaker controls what. We go through the panel, test each circuit, and label it accurately. For older panels where the labeling has never been done or was done incorrectly, this is a straightforward job that pays for itself the first time a repair needs to be isolated quickly.
Panels fail in different ways. A breaker that trips under normal load, a panel that runs warm, or an enclosure with signs of scorching are all reasons to have the panel looked at before the problem gets larger. Full panel replacement involves removing the old enclosure, installing a new panel sized for the current and anticipated load, and transferring the circuits. We explain what the job involves on the call before anything is scheduled.
You shouldn't have to chase an electrician for answers about something as straightforward as an outlet or switch. We install and replace outlets and switches throughout a home or commercial space, including GFCI protection in wet locations and AFCI protection where the code requires it. Dedicated appliance circuits for dryers, ranges, and other high-draw equipment are a separate job we handle the same way: scoped on the call, priced before we start.
Replacing knob-and-tube wiring means running new grounded wiring through the walls and ceilings of the affected areas, removing the old conductors, and connecting the new runs to an updated panel. The scope depends on how much of the home the knob-and-tube covers and how accessible the runs are. We walk through that on the call and give you a realistic picture of what the job involves before anything is committed to. Safe wiring. Solid workmanship. Straight answers.
Homes and Properties Served Across the Area
We cover University and the surrounding communities throughout Hillsborough County. Lake Magdalene, Temple Terrace, Lutz, Carrollwood, and Egypt Lake-Leto are all areas we work in regularly. Whether the call comes from a single-family home, a rental property, or a commercial space anywhere in the area, the process is the same: call for a quote, get the scope confirmed, and get it on the schedule.
If you are not sure whether your address falls within our coverage area, call and ask. We will confirm it on the same call.
A phased rewire is possible in some properties, and it can make the project more manageable for an occupied home. The practical limits depend on how the existing wiring is routed and whether circuits can be isolated by area without leaving other parts of the house in a compromised state. We scope that on the visit and explain what a phased approach would look like for the specific property.
We ask about the work-from-home situation when we schedule so we can plan which circuits will be off and when. In many cases we can stage the work to keep the area used for work live while other parts of the house are being worked on. If a full shutdown is unavoidable, we confirm the timing in advance so it can be planned around.
An intermittent fault, one that comes and goes without an obvious trigger, requires a different diagnostic approach than a fault that is always present. We ask detailed questions about when the problem occurs, what else is happening at the time, and whether it has gotten more frequent. That pattern often points toward the cause before we arrive, and it shapes how we approach the diagnostic on site.
A commercial office build-out typically involves circuit additions for workstations and equipment, outlet placement for desks and conference areas, lighting installation, and sometimes a subpanel if the space has significant load. We scope the work based on the layout and the equipment that will be in the space. Call us with the square footage and a description of what will be running and we can give you a starting point on the call.
This region sees frequent lightning and extended storm seasons, and both surge protection and backup generator hookups address real risks for homes in this area. A whole-home surge protector installs at the panel and intercepts voltage spikes before they reach your circuits and appliances. A generator hookup includes a transfer switch that safely disconnects the home from the utility line before the generator comes online. We scope both jobs on the call and explain what each one involves before any work is scheduled.
Yes. A sauna or steam unit is an electrical installation that requires a dedicated circuit sized for the unit's draw, often on a 240-volt circuit, and the panel needs the capacity to carry it. The wiring and circuit work is our scope. The installation of the sauna or steam enclosure itself is a separate trade.
Yes. We cover University and the surrounding communities including Lake Magdalene, Temple Terrace, Lutz, Carrollwood, and Egypt Lake-Leto throughout Hillsborough County.
Call (813) 519-5955 and we will confirm your address on the same call before anything is scheduled.
In rental properties and multi-unit buildings, the most common calls involve outlets and switches that have failed from repeated use, panels that were not sized for the load tenants are running, and GFCI protection that was never installed or has stopped working. We handle repairs and upgrades inside the unit and can scope the work on the call to confirm which parts of the system fall within the tenant's unit and which belong to the building.
An electric range requires a dedicated 240-volt circuit sized for the draw of the specific unit, run from the panel to the range location and terminated at the correct outlet type. We confirm the panel has the capacity to carry the new circuit before scheduling, and if it does not we explain what a panel upgrade would involve. The circuit is sized to meet the range manufacturer's requirements and the applicable code.
Quick response. Code-correct work. Tidy finish.
Call (813) 519-5955 to describe what you are dealing with and get a price on the call.
We are available every day from 8:30 AM to 10:00 PM. Reach us through Plant City Electrical Company and the rate is agreed before anything is scheduled.
Electrical work also reaches these towns: Temple Terrace, East Lake-Orient Park, Town 'n' Country, Palm River-Clair Mel, Wesley Chapel. Browse our complete list of towns.
We handle electrical work for homes, rentals, and commercial properties across University, Hillsborough County and the surrounding area. The table below covers every service we offer, who it fits best, and a practical note to help you understand what the job actually involves.
Call (813) 519-5955 to get a price and talk through the scope before anything is scheduled.
| Type of Work | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes running central air, an EV charger, or major appliances on an undersized service | Many older University, Hillsborough County homes came with 100-amp service. Adding modern loads to that panel puts ongoing stress on the breakers and the wiring. A 200-amp upgrade gives the system room to carry the full load modern households place on it. |
| Surge & Lightning Protection |
| Any Florida home, given the frequency and intensity of lightning strikes in this region | A whole-home surge protector catches voltage spikes before they reach your wiring and connected devices. In this part of Florida, it is not an optional add-on. |
| Electrical Safety Inspections |
| Landlords, property managers, and homeowners who want a clear picture of where things stand | An inspection is a useful baseline before a sale, before a tenant moves in, or any time the wiring history of a property is unclear. |
Call (813) 519-5955 to describe what you are dealing with, get a price, and talk through the scope before anything is scheduled.
(813) 519-5955